Package Include:
· 1x Receiver: (1 Channel / Three Control Mode / DC12V)
· 1x Transmitter: CB-2
· 1x User manual
Feature:
· Wirelesscontrol, easy to install.
· ControlLights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electricallyoperated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltageAC110~240V or DC0~28V.
· Youcan turn on/off the receiver with transmitter (remote control) from any placewithin a reliable distance; the wireless signal can pass through walls, floorsand doors.
· Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) use an 8-bitcode.
· One/several transmitters can control one/ several receivers simultaneously.
· Ifyou use two or more receivers in the same place, you can set them withdifferent codes.
· TransmittingFrequency: 315MHz / 433MHz.
Receiver:
·
· Channel:1 CH
· ControlMode: Toggle, Momentary, Latched
· CodingType: Learning code
· CodingSetting: By learning
· PowerSupply (Operating Voltage): DC12V±1V (S1PU-DC12)
· Working Voltage Range of Relay: AC110~240V or DC0~28V
· PCBsize: 74mm x 52mm x 21mm
· Casesize: 79mm x 58mm x 35mm
· MaximumWorking Current: 30A
Transmitter:
·
· Channel:2 CH
· RemoteControl Distance: 1000m / 3000ft (theoretically)
· Encode:Fixed code by Pins
· Unitsize: 135mm x 42mm x 25mm
· PowerSupply: 1 x 6F22-9V battery (Included, useful life 6-12 months)
External extendantenna:
· Frequency Range: 300~450MHz
· Impedance:50Ω
· AntennaLength: 15cm
· CableLength: 150cm
· Weight:35g
· Anti-interference,waterproof, shielded wire set inside
· Magneticstand design for easy to install
Usage:
· 1)Setting control mode Toggle: Only connect Jumper-1.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on the relay (connect B and C, disconnect A and B)
Press button 1 again: Turn off the relay (disconnect B and C, connect A and B)
· 2)Setting control mode Momentary: Only connect Jumper-2.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press button 1 and hold: Turn on the relay (connect B and C, disconnect A andB)
Release button 1: Turn off the relay (disconnect B and C, connect A and B)
· 3)Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, other relays Off; Press another button-> Off.
Press button 1: Turn on the relay (connect B and C, disconnect A and B)
Press button 2: Turn off the relay (disconnect B and C, connect A and B)